FAZUA RIDE 50 STREET Скачать руководство пользователя страница 11

Страница: 11 / 68

Original instructions | English

Only use the drive system as described in these instructions. Any other usage is

regarded as unintended and can result in accidents, serious personal injury and

damage to the drive system.

3.2 Symbols & pictograms of the drive system

On individual components of the drive system, you will find specific symbols and

pictograms which are listed along with their meanings.

This symbol indicates that the user of the drive system or the

individual components must read and understand these original

instructions before use.

Any devices identified with this symbol (in this case, the CHARGER)

may only be used in dry indoor areas.
WARNING! When using in damp environments and on contact with

liquids, there is a risk of electric shock!

An electrical device marked with this symbol corresponds to

protection class II: The device has double or reinforced insulation

as protection against electric shock.

This symbol is a warning against hot surfaces.
WARNING! There is a risk of burns on contact, and a risk of fire on

contact with flammable materials.
These symbols indicate that the BATTERY (lithium-ion rechargeable

battery) must be disposed of separately at the end of its service

life and must not be disposed of with household waste.
For specific information, see the “Disposal” chapter.

This symbol indicates that the component marked with this symbol

must be disposed of separately as electrical or electronic equip-

ment at the end of its service life and must not be disposed of with

household waste.
For specific information, see the “Disposal” chapter.

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды