FAZUA RIDE 50 STREET Скачать руководство пользователя страница 10

Страница: 10 / 68

English | Original instructions

SAFETY

3.1 Functional principle & proper use

FAZUA RIDE 50* is designed as an electric drive system for e-bikes used as a means

of transport for one person.

From a speed of 25 km/h, the electric pedal support

switches off so that at speeds over 25 km/h without motor support, you pedal

solely with your own muscle power.
The drive system as a whole comprises a variety of coordinated components oper-

ating together.
These are:

→

DRIVEPACK

(= MOTOR UNIT) [including LOCKER for locking the DRIVEPACK

to the e-bike frame]
[Models (DRIVEPACK): RIDE 50 DRIVEPACK TRAIL, RIDE 50 DRIVEPACK

STREET | Model (LOCKER): LOCKER PX],

→

BOTTOM BRACKET

[including speed spoke magnet]

[Model: RIDE 50 BOTTOM BRACKET],

→

REMOTE

(= CONTROL UNIT)

[models: REMOTE FX, REMOTE BX, REMOTE RX],

→

BATTERY

(= ENERGY)

[Model: ENERGY 250 X],

→

CHARGER

[Model: CHARGER S (EU/US)].

The version of the drive system installed in your e-bike, in other words the specific

combination of component versions, is designed specifically for your e-bike and

cannot therefore be changed. The basic principle is that the installation of the drive

system as well as specific work on the system are only permitted to be carried out

via the routes specified by the manufacturer or by an authorised specialist.
Information on which works you are able to carry out and which works need to be

performed by an authorised specialist can be found in the separate sections on

the individual components.
FAZUA accepts no liability for damage caused by incorrect or improper installation

or improper use.

* FAZUA RIDE 50 builds on the technological foundations of the FAZUA evation drive system. Some of the compo-

nents of the FAZUA RIDE 50 and evation drive systems are compatible with each other. If you have any ques-

tions, please contact your FAZUA certified partner.

Содержание RIDE 50 STREET




































































Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды

FAZUA RIDE 50 STREET, Оригинальное руководство пользователя

Результаты поиска

Содержание RIDE 50 STREET

Отзывы:

Похожие инструкции для RIDE 50 STREET

Бренды по названию

Популярные бренды