The mesh heads have been tightened in advance, and only need correcting if necessary. When tightening,
always work diagonally across the head, as you would with an acoustic kit.
If you have are not familiar with this procedure, please contact your dealer or a specialist for more
information and/or help. Tightening the heads too much could result in permanent damage.
Tightening the knobs
All tightening knobs, with the exception of the mounting points that are tightened and loosened with the
included drum key are designed to be tightened by hand.
Tightening the knobs too much may result in damage to the plastic components, which can cause distortion.
Damage caused by over-tightening is not covered by the warranty.
Starting up the drum module
- Press the Power button to switch the
drum module on. The last-selected
preset before being turned off will show
on the display.
- Use the large rotary knob to select a
preset drum kit.
- The drum module is equipped with 3
volume controls:
AUX:
this controls the volume of an
external device such as a computer,
smartphone or MP3 player so you can
play along with your favourite music.
Headphones:
this controls the
headphone output volume level.
Master:
this controls the master volume
level from the main output. You can connect a set of speakers to this output, for instance.
- Use the Group Faders on the bottom left to fine-tune the volume levels of the various presets. Use the
sliders to adjust the volume per trigger.
All information and illustrations shown in this user manual are subject to change without further notice.
User manual version: 1.0
Creation date + author initials: 05-05-2015 RV Revision date + author initials:
