8
Install the fan (7) on the disk (10) using the screws (8) and nuts (9). The assembly must be installed on the
reduction gear (11) using the screw (12) and nuts (9). Then insert the bushes (13) into the reduction gear (11)
using the screws (12) and nuts (9).
10
8
7
9
11
12
13
At this point take the wheel with the pin-locked bush (14) and install pin (16) with the split pin (15). Perform
the same operation for the wheel with the plastic bush (17) inserting pin (18) and secure with the split pin (15).
14
16
18
15
17
15
