up an individually touch-defined area.
tab: fine adjustment of the touch area
On this tab you can finely adjust the touch area. This is very useful when you
have problems touching at the edges of the touch screen. In the following image
you can see that the limits for all edges of the screen were corrected (to 110%).
E.g. if you have problems in the upper right area, just increase the upper and
right limit (
). Confirm the change and try the new settings with the
. You can also use the X-axis and Y-axis displacement options to
compensate if your touch always seems to be off the same amount in the X
and/or Y directions.
The "
" option optimizes the touch detection in
the corners of your faytech touch panels. This option should always be enabled.
tabs:
The last two tabs are for information only - there are no options to select on
these tabs.
The
tab gives information about the design of the faytech touch
display and the firmware used.
5. Edge Compensation
>> Bigger
Draw Test
Support Edge Compensation
6. Hardware and About
Hardware
Setting up the faytech Touch software
faytech Ltd. 2009
C
50
Setting up the faytech Touch software
51
If you are having trouble getting your touch monitor to work correctly, please
look through this list of common problems:
Cable connections. Care should be taken when connecting the cables.
Make sure the cables are connected to the right connectors at each end and
make sure the cables are attached firmly to their respective connectors. Lack
Physical Setup:
l
Troubleshooting
The
tab gives information about the touch driver version as well as
information about the developer of the software.
With the Touch Kit icon in the taskbar, you can use a right mouse click to make
quick changes in many of the Touch Kit settings. The individual functions have
already been described in this chapter.
On the context menu, if you select the option
, you will see a
mouse animation displayed in the lower right half of the screen. The red mark
indicates which mouse button will be simulated the next time you touch the
screen. By clicking on the left or right pointer of the animation you change the
behavior of the touch panel accordingly.
About
7. Touchkit program in the taskbar
Display Button