Fayat DYNAPAC F2500W Скачать руководство пользователя страница 219

Страница: 219 / 340

E 12 16

5.2

Fitting the height sensing device

Fit the sensor arm to the required side of
the machine.

- Place the holder (1) on the corre-

sponding journal (2) of the side shield
and fasten with the pin (3), bush (4)
and spring washers (5).

- Tighten the pin (3) so that the sensor

arm is just still able to swivel.

Mount the spring washers (5) in the op-
posite direction

The sensor arm can be secured on the
side shield with the lock (6).

5.3

Mounting the grade control system

Insert the grade control system into the
clamp bracket (1) and secure with the
clamping bolt (2) to prevent rotation.

F0258_A1.TIF/

Содержание DYNAPAC F2500W





















































































































































































































































































































































Результаты поиска

Содержание DYNAPAC F2500W

Отзывы:

Fayat DYNAPAC F2500W, Инструкция по эксплуатации и техническому обслуживанию, Страница: 219 / 340

Результаты поиска

Содержание DYNAPAC F2500W

Отзывы: