Fayat Dynapac F1800W, Руководство по эксплуатации и техническому обслуживанию

Страница: 146 / 348

D 24.18 20
Command Symbol in the display
- Indicator lamp fuel reserve
The fuel is down to the reserve level in the tank.
A
Approx. 10% remains
m
Urgent need to refuel!
- Pre-heating indicator (yellow)
A
Pre-heating is started with the ignition starter
by switching the ignition on. (ignition key
in position 1).
Once pre-heating has finished, the indicator
lamp goes off.
m
Do not switch the start button until the pre-
heating phase has finished!
- Error message
Indicates that there is a drive engine fault. Depend-
ing on the type of fault, the vehicle can temporarily
continue to be operated or, in the case of serious
faults, should be shut down immediately to prevent
further damage from occurring.
Each fault should be rectified as soon as possible!
A
An error code query can be shown in the
corresponding menu of the display.
A
Lights up for a few seconds once the ignition
has been switched on for checking purposes.
- Hydraulic oil temperature indicator lamp
Hydraulic oil temperature too low!
m
Bring vehicle up to temperature with station-
ary acceleration!
A
The engine speed cannot be increased when
the hydraulic oil temperature is too low!
- Warning:
The vehicle has one or more errors.
A
Error details can be viewed in
the "Error Memory" display menu.