manualshive.com logo in svg

Fayat DYNAPAC DRP45DX, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Fayat DYNAPAC DRP45DX Скачать руководство пользователя страница 53

6.3  Operation

Operate the machine only with the steering rod folded down.

Use only the steering rod to steer the machine.

Guide the machine so that your hands do not hit against solid

objects.

Keep feet clear of the vibrating base plate.

CAUTION!
Danger of injury caused by uncontrolled

machine movement!

–

Always hold on to a running machine.

–

Always keep an eye on a running machine.

Protective equipment:

n

Hearing protection

n

Working clothes

n

Safety shoes

1.

Make sure that nobody is in the danger zone.

2.

NOTICE!
The centrifugal clutch may be damaged!

–

Operate the machine only with full

throttle.

Set the throttle lever to “MAX” position.

3.

Shift the handle forwards.

ð

The machines vibrates forward with a speed which corre-

sponds with the travel lever position.

B-692-0022

Fig.  34

B-692-0242

Fig.  35

Operation – Operation

 

DRP45DX

 

53

Содержание DYNAPAC DRP45DX















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды