manualshive.com logo in svg

Fayat Bomag BW 900-50, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Bomag BW 900-50 Скачать руководство пользователя страница 79

NOTICE!

If the filter has to be changed together with the

hydraulic oil, the filter must only be changed after

the oil change and after the test run.

Do not use the oil in the filter bowl again.

Visible dirt may be an early sign for the failure of

system components and indicate the possible

failure of components. In this case determine the

cause and replace or repair the defective compo-

nents, if necessary. Negligence may cause

destruction to the entire hydraulic system.

Do not clean or reuse the filter element.

Apart from the normal oil change intervals, the filter

element must also be changed after major repairs

in the hydraulic system.

ENVIRONMENT!

Catch running out oil, dispose of oil and filter ele-

ment environmentally.

Remove filter bowl (4) 

Ä

 Fig.  101 with filter element (3).

Examine the surface of the filter element thoroughly for any

visible dirt.

Take out the old filter element and clean filter bowl and

thread.

Reassemble the filter bowl with a new filter element and new

loop rings (1) and (2).

After a short test run check the filter for leaks.

6.9.3  Checking fuel lines and clamps

WARNING!
Danger of burning!

Perform inspection work only after the engine has

cooled down and with the engine stopped.

Fig.  101

Maintenance – Every 2000 operating hours

 

BW 900-50

 

80

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание Bomag BW 900-50



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды