manualshive.com logo in svg

Fayat BOMAG BW 100 ADM-5, Инструкция по эксплуатации

Поделиться
Скачать
Fayat BOMAG BW 100 ADM-5 Скачать руководство пользователя страница 133

7.4  Loading by crane

Loads must only be attached and hoisted by an

expert / capable person.
Do not use damaged or in any other way

impaired lashing points.
Use only lifting gear and lifting tackle with suffi-

cient load bearing capacity for the weight to be

loaded. Minimum load bearing capacity of

lifting gear: see max. operating weight

Ä

 Chapter 2 ‘Technical data’ on page 13

.

Always use appropriate lifting and lashing

means on the lifting and lashing points.
Use lifting and lashing gear only in the pre-

scribed direction of load application.
Lifting tackle must not be damaged by machine

components.
When lifting the machine avoid uncontrolled

movements of the load. If necessary hold the

load with guide ropes.

Protective equip-

ment:

n

Working clothes

n

Safety shoes

n

Protective gloves

1.

Shut down the engine.

2.

Attach and secure the articulation lock

Ä

 Chapter 8.2.3.1 ‘Engaging the articula-

tion lock’ on page 143

.

The foldable ROPS can be folded

down to reduce the transport height.

3.

If necessary, fold down the foldable ROPS.

Loading / transporting the machine – Loading by crane

 

BW 100 ADM-5

 

133

Содержание BOMAG BW 100 ADM-5

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды