manualshive.com logo in svg

Fayat BOMAG BPR 35/60 D, Руководство по эксплуатации

Поделиться
Скачать
Fayat BOMAG BPR 35/60 D Скачать руководство пользователя страница 73

4.

Pull the fuel filter out of the tank by the string.

5.

Pull the fuel hose (3) off the fuel filter (2).

6.

Take the fuel filter out of the bracket (1) and replace it with a

new one.

7.

Plug on the fuel line.

8.

Insert the fuel filter into the tank.

9.

Close the fuel tank tightly.

The fuel system is self-bleeding.

10.

Dispose of fuel and filter in an environmentally friendly way.

8.8.5  Servicing the V-belt

Protective equipment:

n

Working clothes

n

Protective gloves

1.

Park the machine in secured condition

 

Ä

 Chapter 6.4

„Parking the machine in secured condition“ on page 51

.

2.

Allow the engine to cool down.

3.

Disassemble the V-belt guard (1).

1.

Check condition and tension of V-belt.

ð

Compression measurement:

 5 - 15 mm (0.2 - 0.6 in).

2.

The V-belt cannot be re-tightened.

Replace the V-belt if it is damaged or if the compression

measurement is exceeded.

Fig.  62

Preparations

Fig.  63

Checking the V-belt

Fig.  64

Maintenance – Annually

 

BPR 35/60 D

 

76

Go to

Discount-Equipment.com 

to

order your parts

Содержание BOMAG BPR 35/60 D



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды