Fayat BOMAG BPR 25/40 D, Руководство по эксплуатации

Страница: 61 / 79

Thread in the new starter rope and fix it with knots on both
ends Ä Fig. 50.
NOTICE!
Incorrect sense of rotation will damage the spring ends
of the recoil spring.
Pre-tension the coil by approx. 4 rotations in direction of
arrow. Thereby place the starter rope into the recess in the
coil Ä Fig. 51.
WARNING!
Danger of injury!
Do not let the starter handle hit back, but guide it back
slowly.
Slowly guide the starter handle back to initial position
Ä Fig. 52. The rope is thereby wound on the coil.
Test function and light movement of the recoil starter by
pulling the starter handle.
Mount the recoil starter to the engine housing.
6.10.5 Change the oil in the exciter shaft housing
NOTICE!
Park the machine on level ground.
For quality and quantity of oil refer to the ”table of fuels and
lubricants”.
ENVIRONMENT!
Catch running out old oil, do not let it seep into the
ground and dispose off environmentally.
Clean the area around breather and drain plug.
Fig. 50
Fig. 51
Fig. 52
Maintenance
BPR 25/40 D - BPR 25/50 D 65
Go
to
Discount-Equipment.com
to
order
your
parts