5.8 Loading/transport
WARNING!
Danger of accident! Life hazard!
Make sure that persons are not endangered by the
machine tipping or sliding off.
Use only safe lifting gear of sufficient load bearing
capacity Minimum lifting capacity of lifting gear: see
operating weight in chapter "Technical Data".
Loads must only be attached and hoisted by an expert
(capable person).
For lifting the machine attach the lifting gear only to the
lifting eye provided for this purpose.
Check lifting eye for damage before use. Do not use a
damaged or in any other way impaired lifting eye.
Do not lift or lower the machine jerkily.
The tension must always be effective in vertical direc-
tion.
The machine must not swing about when being lifted.
Do not step or stand under suspended loads.
Always use suitable lashing gear on the lifting points to
lash down the machine.
When lashing down the machine disassemble the
transport wheels from the base plate.
Optional equipment
Lash the machine down, so that it is secured against
rolling, sliding and turning over.
Set the steering rod
Fig. 30 to upright position.
Engage the locking pin securely.
Fig. 30
Operation
BPR 25/40 D - BPR 25/50 D
40
Go to
Discount-Equipment.com
to
order your parts
