manualshive.com logo in svg

Fayat BOMAG BPR 25/40 D, Инструкция по эксплуатации и техническому обслуживанию, Страница: 70 / 103

Поделиться
Скачать
Fayat BOMAG BPR 25/40 D Скачать руководство пользователя страница 70

7.

CAUTION!
Danger of eye injuries caused by particles

flying around!

–

Wear your personal protective equipment

(safety gloves, protective working

clothes, goggles).

Blow the air filter out with dry compressed air (max. 5 bar

(73 psi)) from inside to outside by moving the gun up and

down inside the element, until it is free of dust.

8.

Examine the air filter with a torch for cracks and holes.

9.

Replace the air filter if it is damaged.

10.

Insert the air filter (1) carefully into the filter housing and

fasten it with the knurled nut (2).

11.

NOTICE!
Danger of engine damage!

–

Ensure correct fit of air filter cover and

seal.

Close the cap (3).

B-GEN-0042

Fig.  58

B-HAT-0006

1

2

3

Fig.  59

Maintenance – Weekly

 

BPR 25/40 D

 

72

Go 

to 

Discount-Equipment.com 

to 

order 

your 

parts

Содержание BOMAG BPR 25/40 D








































































































Отзывы:

Нет отзывов