UPDATE INSTRUCTIONS
6 / 16
Correction signal frequency Starfire 6000
Update instructions
1.2. Concerning your safety
1.2.1. Basic prerequisites
1.2.1.1. General information
This BOMAG machine has been built in compliance with the latest
technical standard and complies with the applicable regulations and
technical rules.
However, this machine may represent a danger to persons and
property if:
▪
it is used for purposes other than the ones it is intended for;
▪
it is operated by untrained personnel;
▪
it is changed or converted in an unprofessional way;
▪
the safety instructions are not observed.
Each person involved in the operation, maintenance and repair of the
machine must therefore read and comply with these safety
regulations. If necessary, the operating company must obtain the
relevant signatures as confirmation.
Furthermore, the following also applies on principle:
▪
applicable accident prevention instructions;
▪
generally accepted safety and road traffic regulations;
▪
country/state specific safety regulations.
It is the duty of the operator to be acquainted with the safety
regulations and to apply these accordingly. This also applies for local
regulations concerning different types of handling activities. Should
the recommendations in these instructions be different from the
regulations valid in your country, you must comply with the safety
regulations valid in your country.
1.2.1.2. Explanation of signal words used:
DANGER!
Danger to life if failing to comply!
Sections marked with this symbol indicate an extremely
dangerous situation that could lead to fatal or severe
injuries, if this warning is disregarded.
WARNING!
Danger to life or danger of severe injuries if failing to
comply!
Sections marked with this symbol indicate a dangerous
situation that could lead to fatal or severe injuries, if this
warning is disregarded.
CAUTION!
Danger of injury if failing to comply!
Sections marked with this symbol indicate a dangerous
situation that could lead to minor injuries, if this warning
is disregarded.
