Fayat Group DYNAPAX DRP45DX Скачать руководство пользователя страница 87

Страница: 87 / 118

8.9.4 Replacing the fuel filter

NOTICE!
Danger of engine damage!

–

Ensure strict cleanliness! Thoroughly clean the

area around the fuel tank beforehand.

–

Never operate the engine after having removed

the fuel filter.

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4

‘Parking the machine in secured condition’ on page 59

Clean the area around the tank filler cap.

Remove the tank filler cap.

Pull the fuel filter out of the tank by the string.

Pull the fuel hose (3) off the fuel filter (2).

Take the fuel filter out of the bracket (1) and replace it with a

new one.

Plug on the fuel line.

Insert the fuel filter into the tank.

Close the fuel tank tightly.

The fuel system is self-bleeding.

10.

Dispose of fuel and filter in an environmentally friendly way.

8.9.5 Replacing the air filter

NOTICE!
Danger of engine damage!

–

Do not start the engine after having removed

the air filter.

Protective equipment:

Working clothes

Protective gloves

Park the machine in secured condition

Chapter 6.4

‘Parking the machine in secured condition’ on page 59

Allow the engine to cool down.

Fig. 93

Maintenance – Annually / every 250 operating hours

DRP45DX

Содержание DYNAPAX DRP45DX























































































































Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды

Fayat Group DYNAPAX DRP45DX, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды