Fayat Group DYNAPAX DRP45DX Скачать руководство пользователя страница 50

Страница: 50 / 118

5.3 Daily maintenance

5.3.1 Checking the engine oil level

NOTICE!
Danger of engine damage!

–

+Use only oil of the permitted specification

Chapter 8.3.1 ‘Engine oil’ on page 69

Protective equipment:

Working clothes

Safety shoes

Protective gloves

Clean the area around the oil dipstick.

Unscrew the dipstick and wipe it clean with a lint-free, clean

cloth.

Screw the dipstick back in and pull it out again to check the

oil level.

The oil level must be between the “MIN” and “MAX”

marks.

NOTICE!
Danger of engine damage!

–

Do not overfill with engine oil.

If the oil level is too low, top up oil to the “MAX” mark.

Screw the oil dipstick in.

B-SYM-1068

Fig. 33

B-HAT-0052

Fig. 34

Checks prior to start up – Daily maintenance

DRP45DX

Содержание DYNAPAX DRP45DX























































































































Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды

Fayat Group DYNAPAX DRP45DX, Инструкция по эксплуатации, Инструкция по обслуживанию

Результаты поиска

Содержание DYNAPAX DRP45DX

Отзывы:

Похожие инструкции для DYNAPAX DRP45DX

Бренды по названию

Популярные бренды