Fayat Group DYNAPAC S100, Руководство по эксплуатации и техническому обслуживанию

Страница: 16 / 101

P a g e 16 | 101
BEFORE STARTING THE ENGINE
1. Check the engine oil level and top up if required. Open the fuel valve under the fuel tank.
Check that the movement control is in neutral.
2. For cold starts, push the accelerator lever completely forward to activate the choke.
3. Pull the starter to start the engine.
4. As soon as the engine starts, gradually remove
the lever from the choke position until the
engine runs without it.
Using the machine

Practise at low speed until you completely master the controls.

For normal work, the accelerator should be in the fully open position. By using the
movement control to speed up or slow down the machine during use, you can keep
maximum control.

If you use the machine at less than full engine speed in difficult conditions, the machine
will struggle and risk excessive wear.

The centre of gravity moves when the machine is loaded. Keep in mind your physical
capacities to keep yourself out of danger and be able to control the machine in all
situations.