Fayat Group DYNAPAC DFP7AX Скачать руководство пользователя страница 84

Страница: 84 / 114

8.8 Annually

8.8.1 Replacing the spark plug

NOTICE!
Danger of engine damage!

–

Do not use spark plugs with incorrect heat

value.

Recommended spark plugs:

NGK

BPR6ES

DENSO

W20EPR-U

Protective equipment:

Working clothes

Protective gloves

Special tool:

13/16 inch spark plug spanner

Park the machine in secured condition

Chapter 6.5

„Parking the machine in secured condition“ on page 64

Allow the engine to cool down for at least 15 minutes.

Clean the area around the spark plug.

Unscrew the spark plug using a 13/16 inch spark plug

spanner.

Check the electrode gap of the new spark plug with a feeler

gauge, if necessary, adjust the gap.

Nominal value:

0.7 - 0.8 mm (0.028 - 0.032 in)

Screw in the new spark plug carefully by hand.

Once the sealing surface of the new spark plug is in contact,

tighten for another 1/2 turn with the spark plug spanner.

8.8.2 Checking, adjusting the valve clearance

Perform this maintenance work at the latest after

250 operating hours

NOTICE!
Danger of engine damage!

We recommend to have this work carried out by

trained personnel or our after sales service.

–

Before checking the valve clearance let the

engine cool down.

Fig. 63

Maintenance – Annually

DFP7AX

Содержание DYNAPAC DFP7AX



















































































































Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды

Fayat Group DYNAPAC DFP7AX, Инструкция по эксплуатации

Результаты поиска

Содержание DYNAPAC DFP7AX

Отзывы:

Бренды по названию

Популярные бренды