Fayat Group DYNAPAC CA1500 Скачать руководство пользователя страница 71

Страница: 71 / 168

Operation

4812159201_F.pdf

2019-10-21

Control panel, adjustments

Fig. Operator's station
1. Locking lever - rotation
2. Locking lever - steering column
angle

The control unit has two adjustment options, rotation
and steering column angle.

For rotation, lift the lever (1).
Ensure that the control unit locks in position before
operating the machine.

Release locking lever (2) to adjust the steering column
angle. Lock the steering column in the new position.

To adjust the operator's seat, see the section for
basic/comfort seat.

Adjust all settings when the machine is stationary.

Always ensure that the seat is in locked position
before operating the roller.

Parking brake

Fig. Control panel
1. Parking brake

Ensure that the parking brake (1) is definitely
switched on.

Brake is always activated in Neutral position.
(automatic 1.5 sec.)

The parking brake must be activated to start the
machine!

Содержание DYNAPAC CA1500









































































































































































Результаты поиска

Содержание DYNAPAC CA1500

Отзывы:

Fayat Group DYNAPAC CA1500, Инструкция по эксплуатации, Страница: 71 / 168

Результаты поиска

Содержание DYNAPAC CA1500

Отзывы: