manualshive.com logo in svg

Fayat Group Bomag BVP 10/36, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Group Bomag BVP 10/36 Скачать руководство пользователя страница 56

Position the engine horizontally and unscrew the oil dipstick

Ä

 Fig.  43.

Fill in oil through the oil filler opening, until it reached the filler

socket.

Check the seal on the dipstick, replace if necessary.

Screw the oil dipstick back in.

6.9.2  Check, clean the spark plug, replace if necessary

WARNING!
Danger of burning!

Let the engine cool down before unscrewing the spark

plug.

NOTICE!

In case of excessive combustion residues, burned off

electrodes or torn insulator replace the spark plug.

Do not use spark plugs with incorrect heat value. An

incorrect spark plug can cause damage to the engine.

Pull off the spark plug socket (1) 

Ä

 Fig.  44 and unscrew the

spark plug (2).

Fig.  43

Fig.  44

Maintenance

 

BVP 10/36 / BVP 18/45  

 

58

Go to

Discount-Equipment.com 

to

order your parts

Содержание Bomag BVP 10/36













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды