manualshive.com logo in svg

Fayat Group Bomag BVP 10/36, Инструкция по эксплуатации, Инструкция по обслуживанию

Поделиться
Скачать
Fayat Group Bomag BVP 10/36 Скачать руководство пользователя страница 62

Open the fuel tap 

Ä

 Fig.  55 by turning in direction of arrow.

ENVIRONMENT!

Catch running out fuel, do not let it seep into the

ground and dispose off environmentally.

Unscrew the sediment filter (1) 

Ä

 Fig.  56, drain off and catch

all fuel.

Check the seal (2) for damage, change if necessary.

Screw the sediment filter with sealing ring in tightly.

Unscrew the hexagon nut (1) 

Ä

 Fig.  57 and the hexagon

screw (2) and take off the fuel tank.

Open the hose clamp (1) 

Ä

 Fig.  58 and pull off the hose.

Unscrew fuel screen (2).

Clean the fuel screen, check the condition of the screen

(holes), replace if necessary.

Check the seal (3), replace if necessary.

Turn the fuel screen filter tightly in with the seal.

Fasten the hose and reassemble the fuel tank.

Fig.  55

Fig.  56

Fig.  57

Fig.  58

Maintenance

 

BVP 10/36 / BVP 18/45  

 

64

Go to

Discount-Equipment.com 

to

order your parts

Содержание Bomag BVP 10/36













































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды