FAVI Rio HD, Руководство пользователя

Страница: 8 / 13

R I O H D
5
5 5
5
a composite audio cable (red/white) to the corresponding cable box
outputs and then to audio composite inputs (red/white) on the projector.
•
Component Video - Connect your green/blue/red to the output on your
cable box and then connect to the green/blue/red projector inputs. Next
connect a red and white composite audio cable to the output of your cable
box and then to the red/white composite audio inputs on the projector.
Laptop / PC
Your VGA cable should first be connected to your PC or Laptop then to the
projector. Please ensure the cable is screwed tightly in place on both ends. Then set
your source button on the projector to “PC”. If you do not see your computer screen
projecting you will need to consult your computer manual for the correct VGA setting.
Usually the correct key combination to read the VGA signal is to hold down the
“function” key and press ”f4”. The key combinations vary with the PC/laptop make
and model.
Step 2 - Turning on Your Rio
Place the projector in the proper viewing position and plug in the power cord.
Once the status indicator light turns red press the power button on top of the
projector or on the remote. To turn off the projector you will need to press the
power button twice. The status indicator light should then turn to orange. The
fans will continue to run for 7 minutes. The power supply should not be cut off
when the fan is running. Cutting the power while the fan is running could cause
damage to the lamp and the projector.
Step 3 - Focusing
The zoom function can be used when the projector is on the s-video or aux
setting. Otherwise the image size can only be adjusted by moving the projector.
Once you have the correct image size you can focus the unit manually by turning
the lens. If the image is distorted please use the keystone correction knob on the
side. Please do not force the knob in either way.