8
Please read these operating instruc-
tions carefully with particular atten-
tion to the safety notes. Always
store these operating instruccions
together with the vibrating grinder.
Technical data
Voltage
230 Volts
Power consumption
170 Watts
Grinding surface area
227 x 115
Sandpaper size
280 x 115
Vibrations per minute
20,000
Shockproof, interference suppressed
Designed in accordance with appli-
cable standards
Included in delivery
VIS 250,
Dust collector bag,
Operating instructions,
3 sheets of sandpaper
General safety notes
– Always remove the plug from the
power supply socket before carrying
out any maintenance or repair work
such as cleaning the sander or
changing the sandpaper!
– Always disconnect the machine by
removing the plug from the socket,
not by pulling on the mains cable.
– Always wear safety goggles and
dust mask when working.
– Keep the workplace clean and well
illuminated.
– Ensure that the workpiece is suffi-
ciently secured so that you are able
to work safety and effectively.
– Keep children away from the
machine.
– Always keep your machine clean,
and check for possible defects of
damage after every job.
– Always ensure that the switch is
switched off before you insert the
plug into the power supply socket.
– Ensure that any platforms you are
working on are sturdy and stable.
– If the machine is damaged, use the
exploded diagram and the spare
parts list to determine the precise
cause of the damage, and order any
neccessary parts from Customer
Service.
1 Electrical cord
2 Main grip
3 Locking button
4 On/off trigger
5 Machine identifi-
cation plate
6 Front gripp
7 Dust collector bag
8 Vibration plate
9 Clamping device
10 Sandpaper
Caution!
Health reasons require that you use the
dust collector bag.
Warning!
– The pad sander is not designed
for wet sanding.
– When using a cable reel, make
sure to roll up the cable com-
pletely (wire diameter min.
1 mm
2
).
– Disconnect the sander from the
power supply when work has
been completed.
– If the machine is defective,
have it serviced by a qualified
dealer immediately.
On/Off switch
On:
Press trigger A.
Continuous
Lock trigger A with locking
operation:
button B.
Off:
Press the operating switch
A briefly and release
GB
Inserting the dust collector bag or vacuum
Anleitung VIS 250 Faust 9-spr 06.11.2001 9:20 Uhr Seite 8
