FAURE FWG 5145, Руководство пользователя

Страница: 8 / 24

Start the programme by pressing button 5
To start the selected programme, press the button 5 ,
the corresponding green pilot light stops blinking. The
pilot light corresponding to the running phase illumi-
nates. The appliance starts operating and the door is
locked.
To interrupt a programme which is running, press the
button
5 : the corresponding green pilot light starts
blinking.
To restart the programme from the point at which it was
interrupted, press the button
5 again . If you have
chosen a delayed start, the machine will begin the
countdown.
If an incorrect option is selected, the
red pilot light of
the button 5 blinks 3 times.
Interrupting a programme
Press the button 5 to interrupt a programme which is
running, the corresponding green pilot light starts blink-
ing.
Press the button again to
restart the programme.
Cancelling a programme
Turn the selector dial to « O » to cancel a programme
which is running. Now you can select a new pro-
gramme.
Opening the door
After the programme has started the door is locked. If,
for any reason, you need to open it, set firstly the ma-
chine to PAUSE by pressing the button
5 . After a few
minutes it will be possible to open the door.
If the door remains locked, this means that the machine
is already heating or that the water level is too high. In
any case, do not try to force the door!
If you cannot open the door but you need to open it you
have to switch the machine off by turning the selector
dial to
O . After a few minutes the door can be opened
(pay attention to the water level and tempera-
ture!)
.
After closing the door, it is necessary to select the pro-
gramme and options again and to press button
5 .
At the end of the programme
The machine stops automatically. The pilot light of but-
ton
5 and the pilot light corresponding to the just fin-
ished washing phase go off. The light 7.3 illuminates.
After a few minutes the door can be opened.
If a programme or an option that ends with water left in
the tub has been selected, the light
7.3 illuminates but
the door remains locked to indicate that the water must
be emptied out before opening the door.
Follow the below instructions to empty out the water:
1. Turn the programme selector dial to
O .
2. Select the draining or spinning programme.
3. Reduce the spin speed if needed, by pressing the
relevant button.
4. Press button 5 .
At the end of the programme, the door can be now
opened. Turn the programme selector dial to
O to
switch the machine off.
Remove the laundry from the drum and carefully check
that the drum is empty. If you do not intend to carry out
another wash, close the water tap. Leave the door open
to prevent the formation of mildew and unpleasant
smells.
Helpful hints and tips
Sorting out the laundry
Follow the wash code symbols on each garment label
and the manufacturer’s washing instructions. Sort the
laundry as follows: whites, coloureds, synthetics, deli-
cates, woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their «whiteness» in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Button up pillowcases, close zip fasteners, hooks and
poppers. Tie any belts or long tapes.
Remove persistent stains before washing.
Rub particularly soiled areas with a special detergent
or detergent paste.
Treat curtains with special care. Remove hooks or tie
them up in a bag or net.
Removing stains
Stubborn stains may not be removed by just water and
detergent. It is therefore advisable to treat them prior
to washing.
8