FAURE FBA7340, Руководство пользователя

Страница: 9 / 16

Problem Possible cause Solution
The door is not closed correctly. Refer to "Closing the door".
The product temperature is too high. Let the product temperature de-
crease to room temperature before
storage.
Many products are stored at the
same time. Store less products at the same time.
There is no cold air circulation in
the appliance. Make sure that there is cold air circu-
lation in the appliance.
Replacing the lamp
1. Disconnect the mains plug from the mains socket.
2. Press on the rear
hook and at the
same time slide
the lamp cover in
the direction of
the arrow.
3. Replace the lamp
with one of the
same power and
specifically designed for household appliances.
(the maximum power is shown on the light lamp
cover)
4. Install the lamp cover by sliding it into its original
position.
5. Connect the mains plug to the mains socket.
6. Open the door. Make sure that the lamp comes on.
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets.
Contact the Service Center.
Technical data
Dimension of the recess
Height 1780 mm
Width 560 mm
Depth 550 mm
The technical information are situated in the rating
plate on the internal left side of the appliance and in
the energy label.
Installation
Caution! Read the "Safety Information"
carefully for your safety and correct operation of
the appliance before installing the appliance.
Positioning
Install this appliance at a location where the ambient
temperature corresponds to the climate class indica-
ted on the rating plate of the appliance:
9