Fat Shark
9
RX power switch:
The RX module power is independently controlled via this switch. If a
module is inserted, but desired video source is via the AV cable; the RX module needs to be
turned off to avoid image conflict.
DVR Operation:
1. SD card MUST be formatted before use to ensure stable recording.
2. DVR is for analog recording only, no HD recording.
3. Do not place alternative files that you want to keep into the DVR. The DVR may not
recognize the file space and write over your files. Use dedicated SD card.
Recording (Using the DVR 5-way switch)
:
After powering goggles, turn on DVR by depressing vertically and holding the DVR control
button for 1 full second (
long press)
.
The DVR red LED should now show be solid.
Ensure a SD card is inserted and
short press
to start recording (LED will slowly FLASH (~2
times/second). Single beep on record start.
Short press
again stops recording (turns to solid LED). Double beep on record stop.
Playback (Using the DVR 5-way switch):
After turning on DVR and in stop record mode (SOLID LED) depress and hold DVR button for 1
second (
long press
) to enter menu.
Menu Navigation
Playback
(press right to enter) – the first file will be selected, and a preview will be displayed
•
Press up/down to change the selected file
•
Press right to play the selected file
o
During playback, up/down will control playback speed or rewind
o
Right press will pause / unpause the video
o
Left Press will return to the main menu
Format
(press right to enter)
Execute (press right again to begin formatting the SD card)
Record
(press right to enter) – there are 3 modes to choose from
•
Default mode:
no recording begins until the button is pressed to start
•
Auto Start:
the DVR will start recording when the headset is powered on
•
Auto Start Continuous:
the DVR will start recording when the headset is powered
on and will overwrite the file if the SD card memory is full
Pressing up/down to select the recording mode and right press to confirm the selection. Press
left
to exit to the main menu.
