Fat Shark
10
Record
(press right to enter) – there are 3 modes to choose from
•
Default mode:
no recording begins until the button is pressed to start
•
Auto Start:
the DVR will start recording when the headset is powered on
•
Auto Start Continuous:
the DVR will start recording when the headset is powered
on and will overwrite the file if the SD card memory is full
Pressing up/down to select the recording mode and right press to confirm the selection. Press
left
to exit to the main menu.
AV connector Pin-out
3.5mm AV Connector
: Yellow: Video,
White: Audio Left, Red: Audio Right
HDMI Input
The HDMI port can be connected to HDMI devices via a Mini to Mini HDMI cable. It is
recommended that the cable is first connected to the HDMI source. Then, turn on the HDO2.
The objective to allow the HDMI device to initiate using power supplied by the host device
before rather than the goggles.
Note: Most HDMI connectivity issues are due to either incorrect monitor settings or faulty a
HDMI cable. Before assuming the HDMI is defective, try connecting with alternative HDMI
sources and alternative cables.
Fat Shark 18650 Battery Case
The Fat Shark 18650 pack with a row of stylish
blue LED indicators allows you to visually check
remaining capacity (4 levels) to prevent a sudden
power/vision lost. It seats securely in the headset
strap pocket. The soft silicone battery cable
extends out of the top of the pack to avoid contact
with head strap. Barrel connector cable features
high strand count wire for flexibility and long life.
Wire stress is minimized by the additional rubber
gasket around the cable exit. 18650 Batteries are
not included.
WARNING: USING NON-CERTIFIED 18650 CELLS CAN CAUSE SERIOUS RISKS OF FIRE OR
OTHERE HAZARDS AND VOIDS THE DEVICE WARRANTY
Ground Video AudR AuL
