Faton FA330V, Руководство пользователя

Страница: 29 / 44

ATTENTION
:
Condensed water may be formed on the air quality sensor when humidity in the room
is extremely high
.
Therefore
,
indicator light of air quality will display poor air quality
even if the air quality is good
.
In this case
,
please clean the air quality sensor or use
any of the manual speed set
.
1
.
Use a soft brush to clean air inlet
/
outlet of the air purifier
.
2
.
Dismount protective cover of the air quality sensor
.
3
.
Use wet cotton stick to clean air quality sensor
,
air inlet and air outlet
.
4
.
Wipe them dry with dry cotton stick
.
5
.
Reinstall protective cover of the air quality sensor
.
Clean pre
‐
filter net
Information
To achieve the optimum performance, it is recommended to wash and maintain the
filter net every two months (about 480 hours
)
after the initial use
.
*
Based on use of the product at home for 8 hours every day
,
and 7 days one week in
average
.
For exterior maintenance
,
wipe surface with a piece of wet cloth or mild cleaning
agent to prevent dust accumulation
.
Please turn off the power and pull out the plug during cleaning and maintenance
.
Only pre
‐
filter nets are washable
,
other filter nets are not washable
.
ATTENTION
:
Please use low speed vacuum cleaner to prevent filter net of the machine from being
damaged
.
HINT
:
Please remove plastic packing of each filter net before putting them into the machine
.
And make sure the label of filter net on one side is facing upward
.
2 7
2 8
29