FATEK FBs-CBES Series, Руководство пользователя

Страница: 23 / 25

23
Chapter 4. CBES Firmware Update
When a new version of the CBES expansion board firmware is released, users can
choose to update or not to update according to their needs.
If you want to update, go to the FATEK official website to download the new image
file version, and use Ether_cfg software to do the update.
※ Note: The firmware update by using Ether_cfg software is only applicable to CBES,
other network communication products in FATEK do not support it.
The firmware update can only operate under a local area network environment,
please install the CBES expansion board in a local network area environment, then
execute the Ether_cfg software and follow the steps to do the update:
①
Select LAN at the Attached Media.
②
Click Scan button to start scanning the online network module.
③
The detected module will list in the table, move the cursor to the CBES
expansion board that you want to set up, double click the left mouse button to
enter the configuration setting window.
1
2
3