FATEK FBs-1HLC Скачать руководство пользователя страница 44

Страница: 44 / 67

H 5 - 1

Chapter 5 Power Supply Wiring, Power Consumption

Calculation, and Power Sequence Requirements

-PLC internally has three kinds of circuit: a 5VDC logic circuit, a 24VDC driver circuit (driver output devices, for

example: relay, transistor, and etc), and a 24VDC input circuit. Only the 5VDC logic circuit and 24VDC output circuit

are powered by the built-in power supply for main/expansion units or powered by expansion power supply modules

(FBs-EPW-AC, FBs-EPW-D24), and the 24VDC input circuit can be choose to powered by the external power supply

or the built-in power supply of main/expansion units or 24VDC sensor of FBs-EPW-AC/D12/D24. Expansion modules

other than main/expansion units do not contain any power supply and are powered by the power supply inside the

main/expansion units or expansion power supply (FB

-EPW-AC, FBs-EPW-D24). Main/expansion units or expansion

power supply with their model numbers suffixed with “-D12/-D24” means is operated by DC power source. Otherwise,

AC power source is used.



Caution

In industrial environments, main power may irregularly experience a surge current or high voltage pulse

caused by the start or shut down of high power equipment. Users are advised to take necessary

measures (for example, the use of isolation transformer or other MOV suppression devices) for the

protection of PLC and its peripherals.

5.1

Specifications and Wiring of AC Power Sourced Power Supply

The available AC power supplies of FB

-PLC are the 14 Watt (SPW14-AC) supply for 10/14 PTs main unit, the 24 Watt

(SPW24-AC) supply for 20~60PTs main/expansion unit, and the 14 Watt expansion supply (FB

-EPW-AC) for

expansion modules. Except that the FB

-EPW-AC is an independent module, SPW14-AC and SPW24-AC are to be

installed on a main unit or inside an expansion unit, where their appearances are invisible. The following table lists the

specifications:

Model

Item

SPW14-AC

SPW24-AC

-EPW-AC

Input Range

Voltage

100 ~ 240VAC, -15% / +10%

Frequency

50 / 60HZ

Max. Power Consumption

21W / 14W

36W / 24W

21W / 14W

Inrush Current

20A@264VAC

Allowable Power Interrupt

＜

20ms

Fuse Spec.

，

250V

Isolation Type

Transformer/Photocouple Isolation, 1500VAC/minute

Power*

Out

put

5VDC (logic circuit)

N/A*

5V,

5%, 1A(max)

5V,

5%, 0.4A(max)

24VDC

(output circuit)

24V

10%, 200mA(max)*

24V,

10%, 400mA(max)

24V,

1%, 250mA(max)

24VDC (input circuit)

24V,

10%, 400mA(max)

24V,

10%, 400mA(max)

24V,

10%, 250mA(max)

Note *

：

The 5VDC (for logic circuit) output power and the 24VDC (for output circuit) power can be accessed from the “I/O expansion

output header” located on the right side of the main/expansion units for expansion modules. And the 5VDC power is also

used by communication board (CBxx) or communication module (CMxx). The 24VDC power for input circuits is provided

from the farthest 2 upper left terminals (labeled “+24V OUT-”) on the input terminal block of main/expansion unit to input

circuit in expansion module or other sensors.

Sp e c

Содержание FBs-1HLC




































































Результаты поиска

Содержание FBs-1HLC

Отзывы:

FATEK FBs-1HLC, Руководство пользователя, Страница: 44 / 67

Результаты поиска

Содержание FBs-1HLC

Отзывы: