Fatar STUDIO 900 Скачать руководство пользователя страница 14

27

STUDIO 90 Plus

26

STUDIO 90 Plus

Look at figure #2 and #3.  The functions are the same, but the location of the midi 
outs and foot switch controls are separated from the power section.  You will find 
this configuration on the ST-90 Plus in the cabinet.
           

Note: If you want merging capabilities with the Studio-90 Plus, you must use a 
merge box.  A good merge box we recommend is the Pocket Merge from Anatek 
Microcircuits, Inc. North Vancouver, BC, CANADA. 

SWITCHING ON:

    

To power on the instrument, connect the supplied power cable into "LINE" input 
and flip the power switch on.  Ever time you power up, program 00 will illuminate 
on the LEDs.

NOTE:

 Studio-90 Plus RESET PROCEDURE:   

If there is ever a time when the Studio-90 Plus acts up in a strange way due to an 
electrical spike, a reset procedure may be necessary.  Turn off power switch.  Press 
switches "ENTER and "1" down together. Turn on power and release "ENTER and 
"1" after two seconds.

  

THIS PROCEDURE WILL CANCEL ALL PREVIOUS PROGRAMS AND DEFAULTS UNIT TO 
FACTORY PRESETS.  MAKE SURE YOU WRITE DOWN ALL IMPORTANT PATCH 
PARAMETERS BEFORE MOVING ON TO CREATE ANOTHER PROGRAM.  THERE IS A 
BLANK PARAMETER CHART IN THE BACK OF THIS MANUAL.  MAKE COPIES AND 
BACK UP YOUR PROGRAMS ON THIS CHART.  THIS IS JUST GOOD ADVICE.

MIDI OUT

2

3

FOOT-SWITCH

MIDI

CONTROL

PROGRAM

CHANGE

 fig. #2

 fig. #3

1

SECTION I:  GETTING STARTED

In this section we will explore the possibilities of the Studio-90 Plus in its entirety.  
Do not skip any pages.  Since each function depends on a previous parameter, it is 
probably best to read carefully from here on out.

LET'S GET STARTED

   

In this section you should get ready for hands on experience.   Plug in one end of a 
midi cable to the output jack of the controller. Plug the other end into the midi 
input of your sound module.  For the first application, even if you have a multi-
timbral module, please set a piano or any other sound that you are comfortable 
with to channel number one.  (Multi-timbral means receive on more than one 
channel at once.)  The first application will only deal with channel number one.  As 
you progress you will be adding channels for different keyboard sound 
combinations.  At this time you should have your amplification set up as well.  Any 
other questions dealing with equipment set up, refer to their respective manuals.  
Once everything is plugged in, power up your system in this order; controller, 
sound modules, effects, mixer, EQ, and amplifier.  This procedure will eliminate 
any potential hazards to your system.

To program the controller properly you must understand in what sequence to push 
the buttons to get the desired result.  Let's take a look at the program function key 
located under the two LEDs.

PROGRAMS:

The Studio-90 Plus  is equipped with 100 programs, represented numerically 
between numbers 00 and 99.  In order to get from one program to another you 
must press the buttons in a particular sequence.  First, enter program mode by 
pressing the button marked (prog.).  Do this now.  A light will illuminate at this 
time underneath the program button, (when the unit is turned on, the program 
light will already be illuminated) then enter a program number by pressing two of 
the numeric keys.  (Example, enter program 00, program 05 or any other desired 
program up to 99).
At this point the numeric LED will flash, then you must press the ENTER* button 
located to the right of the numeric key pad.  This process will lock the desired 
program into a current working memory location.  Do this a couple of times so you 

POWER

ON

OFF

9V DC 200mA

Содержание STUDIO 900
































Отзывы: