7. Compatible CPUs
7.1) Intel Pentium 4 - Socket 775/478
All Pentium 4 CPUs conforming to Socket 775/478 platform
1) Figure 1
Compatible
2) Figure 2
Not Compatible
3) 10.2mm Motherboard component height restriction
4) Motherboard Component
5) Grip
4) Motherboard
Component
5) Grip
7.1.3) For more information regarding compatible motherboards, please visit Fatal1ty’s website
(http://www.fatal1ty.com) or Zalman’s website (http://www.zalman.co.kr).
7.2) AMD Sempron / AMD64 - Socket 754/939/940
All CPUs conforming to Socket 754/939/940 platform
Caution)
7.1.1) No motherboard components higher than 39mm(1.54inch), nor the
PSU, graphics card, RAM etc. should be present within a
68mm(2.68inch) radius from the center of the CPU.
7.1.2) For Socket 478, as shown in Figure 2, a motherboard that is not
compliant with Intel’s "10.2mm Motherboard component height
restriction" standard, may cause interference between the
motherboard’s components and the Grips of the FS-C77. Please do not
install the FS-C77 if this interference is observed.
Caution)
7.2.1) No motherboard components higher than 39mm(1.54inch), nor the PSU,
graphics card, RAM etc. should be present within a 68mm(2.68inch)
radius from the center of the CPU.
7.2.2) For more information regarding compatible motherboards, please visit
Fatal1ty’s website (http://www.fatal1ty.com) or Zalman’s website
(http://www.zalman.co.kr).
8. Installation
※
The FS-C77 must be used with a Grip specific to each
CPU socket. Refer to the table on the right to choose the
correct Grip for installation
.
Socket
Grip
Hole
775
S-Type
Hole
478
L-Type
Inner Hole
754/939/940
L-Type
Outer Hole
(1.73in)
(2.68in)
(1.13in)
(2.
6
8in)
4mm
