Fat Shark
7
RC Vision Systems
Downlink Overview
Downlink system comes preassembled and tested for plug/play with your aircraft.
Simply connect the balance lead of your 2S or 3S (7.4V or 11.1V) RC battery to
provide power to your Fat Shark Downlink and you are ready to fly.
The handy balance lead filters RC servo and motor noise from your RC pack for a
crisp, clear image.
Transmitter
Channel select chart:
1 2 3 4
Ch1 5740 MHz
On
On
On
N/A
Ch2 5760 MHz
Off
On
On
N/A
Ch3 5780 MHz
On
Off
On
N/A
Ch4 5800 Mhz
Off
Off
On
N/A
Ch5 5820 MHz
On
On
Off
N/A
Ch6 5840 Mhz
Off
On
Off
N/A
Ch75860 MHz
On
Off
Off
N/A
WARNING: DO NOT POWER TRANSMITTER
WITHOUT ANTENNA ATTACHED. NO ANTENNA LOAD WILL CAUSE
DESTROY TX RF AMPLIFIER – NOT COVERED BY WARRANTY
Small white connector on back of transmitter is for ImmersionRC’s Tiny Telemetry.
See accessories.
Power (via discharge filter supply)
The discharge filter supply allows you to power your downlink equipment from your
onboard RC pack. Connect as shown below:
