Fat Shark 14
RC Vision Systems
Trouble Shooting
Observation
Possible Cause/Solution
No image, display is
completely dark
- No power supplied. Check power
connections.
No image, display is glowing
dark grey
- If using wireless module, switch to Rx
display mode
- If using AV in cable, check video source.
- Ensure TX is on and camera connections
solid
Poor image, dark or not
enough contrast
- Adjust display with contrast/brightness joy
switch
Lots of interference lines
(horizontal lines)
- Check to see if cause is harmonic
interference from 2.4Ghz RC controller
(turn radio on/off).
- Use CH1 on TX/headset (Ch1 not
affected by 2.4Ghz)
- Check correct frequency antenna is used
- Choose a cleaner channel.
Short range
- Ensure correct antenna are installed
- Check for other sources of interference
- Ensure transmitter has clear LOS to
headset. Test in wide open area, away
from any obstructions
HDMI doesn’t work
- Incorrect display mode settings (when
connected to computer, make sure output
to alternative monitor is selected)
- Faulty HDMI cable/adapters
- Ensure source is set to 720p
Before concluding the HDMI is faulty, test
with alternative HDMI source and different
cables
Warranty
The system can be exchanged for a new unit within 15 days for any
manufacturing defects if returned in new condition. The video headset will
be warranted for repair for 2 years if no signs of excessive use. Buyer will
be responsible for shipping costs. If beyond the warranty period we will
provide repair services.
