Fat Shark
4
RC Vision Systems
Controls Diagram
Controls
Brightness/contrast control:
Pressing left/right increases/decreases display contrast.
Pressing forward/back increases/decreases display brightness.
RX power switch:
The receiver module power is controlled by this switch. Turn off RX
module to avoid video conflict with video source via the AV cable.
Channel select:
Rocking the channel select switch forward and back will cause the channel
to incrementally increase/decrease. Audio beep sounds on channel change. A long beep
sounds on channel top and bottom limits. See OLED section for more details.
Head tracker menu/reset:
Activated by a vertical press on the channel rocker switch.
Low battery warning:
Audio warning if input voltage drops below 6.8V
Volume control:
There is no volume control - volume level is set at high. Please use with
adjustable earphone accessory for volume control.
Channel Selection /
Head Tracker Reset
Display Control
AV in/out
Power in
DVR Control
RF Module
Earphone jack
RX on/off
IPD adjustment
DIN Data Port
(Head Tracker)
