VIM552 Graphics Processor Module
Specifications
V I M 5 5 2 U s e r M a n u a l
© 2 0 1 5 F a s t w e l V e r . 1 . 4
6
List of Figures
Fig. 2-
1: General view of the Module……………………………………………………………………………………14
Fig. 2-
2: Module block diagram…………………………………………………………………………………………. 15
All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose. This information has
been thoroughly checked and is believed to be entirely reliable and consistent with the product that it describes. However, Fastwel accepts no responsibility
for inaccuracies, omissions or their consequences, as well as liability arising from the use or application of any product or example described in this
document.
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at Fastwel's discretion without
further notice. Software described in this document is pro
vided on an “as is” basis without warranty. Fastwel assumes no liability for consequential or
incidental damages originated by the use of this software.
This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by any means, to translate
the document or to convert it to any electronic form in full or in parts without antecedent written approval of Fastwel Co. Ltd. or one of its officially authorized
agents.
Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a registered trademark of Xerox
Corporation. IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers Inc. Intel is a trademark of Intel Corporation. Pentium M
and Celeron M are trademarks of Intel Corporation. Microsoft is a trademark of the Microsoft corporation. In addition, this document may include names,
company logos and trademarks, which are registered trademarks and, therefore, are property of their respective owners.
Fastwel welcomes suggestions, remarks and proposals regarding the form and the content of this Manual.
