background image

ALBM 

Locking Adjustable

Aluminum Ball Mount

  1.  Drop bar

  2.  Drop bar lock cylinder and cover

  3.  Drop bar lock pin(s)

  4.  Height adjustment holes

  5.  Key safety locator tab

  6.  Key code

  7.  Ball holder lock pin

  8.  Ball holder lock cylinder and cover

  9.  Ball holder

 10.  Dual hitch ball

Please register your product. See warranty information on 

back. If you lose your keys, contact us about a replacement 

at 877-523-9103.

Proudly Made in the USA

1

2

3

4

7

(hidden)

8

9

10

3X

X

5

6

For ALBM Models:

2 Inch Receiver: DT-ALBM6400, DT-ALBM6600, DT-ALBM6800, DT-ALBM7000

2.5 Inch Receiver: DT-ALBM6425, DT-ALBM6625, DT-ALBM6825, DT-ALBM7025

Congratulations on your purchase of a new Fastway® Flash™ 

ALBM

 ball mount. Read these instructions 

thoroughly to become familiar with proper set up and maintenance procedures. This will ensure that your Flash 

ball mount will give you maximum performance, and years of service.
KEEP THESE INSTRUCTIONS in a safe place as a reference for future information.

Date of Purchase:

Key Code:

IMPORTANT

: Lost keys 

CANNOT

 be 

replaced without key code. Write it 

down and keep it in a safe place!

BALL

SIZE

MAX

TRAILER

WT. LBS.

MAX

TONGUE

WT. LBS.

 2”

 8,000

 1,000

 2

5

/

16

 10,000

Use and Care Instructions

Содержание FLASH ALBM Series

Страница 1: ...r DT ALBM6400 DT ALBM6600 DT ALBM6800 DT ALBM7000 2 5 Inch Receiver DT ALBM6425 DT ALBM6625 DT ALBM6825 DT ALBM7025 Congratulations on your purchase of a new Fastway Flash ALBM ball mount Read these instructions thoroughly to become familiar with proper set up and maintenance procedures This will ensure that your Flash ball mount will give you maximum performance and years of service KEEP THESE IN...

Страница 2: ...ly be removed from the Lock Cylinder when it s in the locked position 12 o clock LOCKED POSITION PINS OUT 3 X X Tumblers Key Safety Locator Tab Key can not be removed from the Lock Cylinder when rotated past the 12 o clock position unlocked position pins in UNLOCKED POSITION PINS IN Do not unlock the drop bar or ball holder while the ball mount is under load from an attached trailer Check all towi...

Страница 3: ...from the ground to the bottom of the coupler on the trailer then lock the Ball Holder 9 into place on the Drop Bar at that height with the correctly sized hitch ball for your trailer coupler facing up See Figure 2 You may need to invert the Drop Bar and use it in the rise position to reach the correct ball height for your particular trailer Ȳ Ȳ Couple the trailer to the tow vehicle and drop the fu...

Страница 4: ...clude labor charges nor does it include transportation charges for returning the product to the consumer To the extent allowed by law Fastway Trailer Products shall not be liable for any incidental consequential or any other damages including without limitation breach of any implied warranty merchantability or fitness for a particular purpose of any Fastway product In no event shall Fastway Traile...

Отзывы: