Fastway e2 HITCH TRUNNION Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 32

Fastway e2 HITCH TRUNNION Скачать руководство пользователя страница 5

5

A Product of Progress Mfg. Inc.

Important Safety Information

Failure to follow all safety warnings may result in severe injury or death.

Read, understand, and follow all safety warnings, setup, use, and

maintenance instructions of your trailer, tow vehicle, and hitching

equipment before installing your hitch or towing your trailer.
Never cut, weld, grind, bend, or modify hitch components in any way.
It is the driver’s responsibility to adjust equipment and driving habits to

match towing conditions. The driver is responsible for their own safety and

the safety of passengers.
Never exceed the specified weight ratings for the trailer, tow vehicle, hitch,

hitch ball, or any other towing equipment.
No hitch setup guarantees that trailer sway will be altogether avoided.
Always load trailer correctly. Follow trailer and tow vehicle manufacturer’s

recommendations for placement and quantity of cargo.

Warning Stickers

Bar Sticker

(not actual size)

Head Sticker

AVERTISSEMENT

AVERTISSEMENT

ADVERTENCIA

ADVERTENCIA

WARNING

WARNING

Improper setup can cause severe injury or death.

• Read and follow owner’s manual at all times.

• Check for proper setup before towing.

E2TR_0719

1,000 lb maximum tongue weight

10,000 lb maximum trailer weight

For a copy of the instructions visit

fastwaytrailer.com

The e2

™

hitch is a product of Progress Mfg. Inc.

Meets V5 and SAE standards.

92-00-1000

Fast

way

e

2 - Fast

er, E

asier

™

Fastway

e

2 - Faster, Easier

™

92-00-1000

92-00-1000

«
...
3
4
5
6
7
...
»

Содержание e2 HITCH TRUNNION

































Отзывы:

Нет отзывов