6
www.fastTT.bike
FastTT Aero Bar Installation Guide - TKP v8
TRIMMING THE BAR ENDS
Hold the bar end as you would when
riding, resting the bottom of your hand on
the top surface of the extension. It should
fit snugly with no gaps between the base
of your hand and the bar extension.
Measure how much bar end you require
including the finger hook.
Mark the top of the bar ‘A’ including finger
hook length. Deduct the length of the finger
hook from ‘A’ and mark position ‘B’. The
difference between ‘A’ and ‘B’ should equal
the length of the finger hook (excluding the
insertable section).
Your bars have a removable measurement
guide sticker for accurate and consistent
marking. Mark the position to be trimmed
‘B’ with a marker pen. Use a hacksaw or
Dremel cutting tool to trim off the
unwanted bar end.
MEASURE TWICE, CUT
ONCE!
A
B
SECTION A - GETTING STARTED
