- 8 -
⚫
It is strictly forbidden to install, connect, protect, maintain, inspect or replace parts by non
professionals!
⚫
The installation, wiring, maintenance, inspection or component replacement of this product
can only be carried out by professionals who have received relevant training of electrical
equipment and have sufficient electrical knowledge.
⚫
The installation personnel must be familiar with the product installation requirements and
relevant technical data.
⚫
When installing the equipment with strong electromagnetic interference such as transformer,
please install shielding protection device to avoid misoperation of the product!
Wiring
Danger
⚫
It is strictly forbidden for non professional personnel to carry out equipment installation,
wiring, maintenance, inspection or component replacement!
⚫
Do not conduct wiring operation when the power is on, otherwise there will be a risk of
electric shock.
⚫
Please cut off the power supply of all equipment before wiring.
⚫
Please make sure that the equipment and products are well grounded, otherwise there will be
electric shock hazard.
⚫
Please follow the steps specified in ESD, and wear an electrostatic bracelet for wiring to avoid
damaging the internal circuit of the device or product.
Warning
⚫
The cable or copper bar used in wiring must meet the current carrying standard, and the
shielding layer of shielded cable needs to be grounded reliably at one end!
⚫
After wiring, make sure that there are no dropped screws or bare cables inside the equipment
and products.
Power on
FTM1 TYPE SCR power controller
