2007-11-1
Page 10 of 12
EV322_User_manual
4. EVALUATION
SOFTWARE
The UC322 module is configured to NMEA protocol 4800 baud by de-
fault. You may use any evaluation software suitable for NMEA mes-
sages. First connect the USB cable and then use the virtual serial port
COM number as described in previous chapter.
Note that if you remove the USB cable connection and plug it back
again, you may need to restart the evaluation software since it may
occupy the virtual COM port in use and the USB Bridge may not op-
erate properly.
Specific software tools for SiRF chip sets are available from
electronic components distributor
