34
The.dome.camera.must.be.installed.by.qualified.service.personnel.in.accordance.with.all.local.and.federal.electrical.and.building.codes..
Layout.of.Switches
2.4 Setting Dome Camera Termination and Fail Safe Bias
The.device.which.is.connected.at.end.of.line,.whether.it.is.a.dome.camera.or.keyboard.controller,.must.have.the.cable.for.communication.terminated.by.
setting.the.appropriate.DIP.switch..Without.proper.termination,.there.is.potential.for.control.signal.errors..Total.length.of.the.cable.for.communication.should.
not.exceed..km..
Sw1
1
2
3
On
Terminated
FULL.UP
FULL.DOWN
OFF
Not.terminated
OFF
OFF
Sw1
Setting.Dome.Camera.Termination.
When.you.don’t.use.our.keyboard,.the.other.keyboard.may.not.control.our.dome..At.that.time.you.set.the.DIP.switch..and.3.of.the.SW.to.ON.to.add.the.
external.fail.safe.network.of.the.RS-485.line.at.the.nearest.dome.only.from.the.keyboard..
2.5 Setting Dome Camera Address (ID)
To.prevent.damage,.each.dome.camera.must.have.a.unique.address.(ID)..When.installing.multiple.dome.cameras.using.a.multiplexer,.it.is.suggested.that.the.
dome.camera.address.matches.the.multiplexer.port.number.
If.you.wan.to.set.the.address.more.than.999,.you.should.connect.the.service.provider.
example:
. Port..=.Dome.,.Port..=.Dome......Port.6.=.Dome.6..If.more.than.6.dome.cameras.are.installed.using.two.or.more.multiplexers,.ID.of.the..
.
dome.camera.should.be.ID.of.MUX.x.No..of.camera.IN..(e.g..multiplexer.ID=.n,.Camera.IN=.m.then.ID.of.Dome.=6x(n-)+m.)
Setting.Dome.Camera.Address.(ID)
Dome ID
S2
S1
1
0
2
0
…
…
…
99
9
9
S
S
Содержание EDCH-144E/C
Страница 59: ...59...