Fastnet Radio FMD15, Руководство оператора

Страница: 20 / 72

5. NAVTEX, Reception and Decoding
When the unit is in standby mode, it is automatically operating as a
NAVTEX receiver and therefore a manual activation is not
necessary
ATTENTION:
During the reception of other stations, also when receiving a
message programmed to be stored by the timer, NAVTEX
cannot be received.
However, depending on your position, you should put in the
necessary system parameters to enable the best possible NAVTEX
information.
In put of the parameters is done as follows:
press key <SET UP> to call up set up menu
with cursor <DOWN> spring to position 4 - NAVTEX
press <ENTER> to enter NAVTEX menu
Display will show
1 FREQU. 5 REPEAT
2 STATION 6 ALARM
3 MESSAGE 7 STATUS
4 PRINT 8 EXIT