Fastfame 8VTAV, Руководство пользователя

Страница: 21 / 64

21
8VTAV User’s Manual
+
+
+
DIMM1 DIMM3 DIMM2
LPT1
COM1
COM2
USB
PS/2
A
TX POWER
FDC
IDE1 IDE2
FAN2
PCI1
PCI4
PCI3
PCI2
PCI5
AGP4X
IR1
AMR
WOL1
JP3
1
GAME/AUDIO
USB2
ISA1
CD1
CD2
JP7
FAN3
JP1
JP4
SOCKET 462
Note: The CPU and motherboard will overheat if there is no airflow across
the CPU and onboard heatsink. Damage may occur to the motherboard and
the CPU fan if these pins are incorrectly used. These are not jumpers, do
not place jumper caps over these pins.
System Panel Connectors (JP10)
Refer to the following figure for item 14 to 18
.
14.Power LED Lead
This indicates the status of the system power is turned "ON' or "OFF" The
LED will light when the system power is turned on and will go off when the
system power is turned off.
15.System Warning Speaker Connector
This 4-pin connector connects to the case-mounted speaker.
16.ATX Power Switch Lead
The system power is controlled by a momentary switch connected to this
lead. Pressing the button once will switch the system between ON and
SOFT OFF. Pushing the switch while in the ON mode for more than 4 sec-
onds will turn the system off. The Power LED shows the status of the sys-
tem power.
17.HDD LED Lead
This connector supplies power to the cabinet IDE activity LED. Read and
write activity by devices connected to the Primary or Secondary IDE con-
nectors will cause the LED to Light up.
18.Reset Switch Lead
This 2-pin connector connects to the case-mounted reset switch for rebooting
your computer without having to turn off your power switch. This is a pre-
ferred method of rebooting to extend the life of the system power supply.