HEAD INSTALLATION AND OPERATING INSTRUCTION
Roseville, MN
Ph: 1-800-444-2373
Fax: 651-645-7390
www.fastestinc.com
WP171 Rev A 03/28/2019
Torque tool
Head
CoreMax Valve
hex
KNURLED
BACK BODY
CoreMax Seat
hex
Torque tool
Fully engaged with valve
assembly
CoreMax Valve
hex
CoreMax Seat
Tool Trigger
Torque tool
Fully engaged with valve
assembly
SCFTP16
ASSEMBLY
SCFTP06
Place drive socket onto an-
gle wrench drive.
Hold Socket
(SCFTP6212)
Socket firmly attached to
the drive adapter
OPERATION:
1.
With the seat (SCH07030xxx) Brazed in place, Place the CoreMax Core (SCCA07H
Into seat. Turn the valve to start the thread.
2.
With the CoreMax valve started into the seat place the torque tool onto
The valve, being sure that the socket(s) of the torque tool are engaged with
The hex’s of the seat and the valve.
3.
With the tool fully engaged with the CoreMax
Valve/Seat assembly, squeeze the
Trigger of the tool. The tool will spin the Core Valve
into the seat until 8 ft/lbs. of
Torque is achieved at a speed of 200 RPM’s (max).
Once the proper torque is achieved the
torque tool will shut off.
Installation of the tool head (SCFTP16), Onto the SCFTP06 angle
wrench.
1.
Obtain the torque head assembly (SCFTP16) and the angle torque wrench
(QXN2PT18PS6-VP1-K40).
2. Securely place the 1/4” drive adapter (SCFTP61) Into the SCFTP06 tool. Attach the ½” dp
socket (5543A87) to the square end of the adapter.
3.
Place the hold socket (SCFTP6212) and socket head on to
the torque wrench/head assembly. Thread on. NOTE: The threads are left hand.
