FASTERHOLT FM4900H, Руководство пользователя

Страница: 13 / 88

13
Short instructions for use
Move machine to a new lane. Display shows start and stop time. Pull hose out to end
of the lane. (e.g. 250 m)
Display now shows stop after 9h 20m. Press the "+" or "-" key to set the speed. Speed
can be adjusted during irrigation.
SPEED has decreased, DOSE has increased and STOP time is later.
Press START to start. Press PRE and POST for pre- and post-irrigation respectively.
STOP time will be later when PRE and POST irrigation are selected.
The turbine will start when the water pressure increases. After a short period, the
regulator finds the correct speed. Irrigation continues until STOP SENSOR is activated
at the end of the lane.
If pre-irrigation is selected, the turbine stops immediately after performing a start and
pre-irrigation. When the pre-irrigation time has elapsed, the turbine starts and the
machine changes status to Irrigating.
If post-irrigation is selected, the turbine stops at the end of the lane when the stop
sensor is activated. Post-irrigation then starts.
Stop sensor is activated, turbine and water are shut off. The machine is now ready to
be moved to a new lane.