FASTERHOLT FM4800H, Руководство пользователя и каталог запасных частей

Страница: 7 / 88

7
Operating instructions
Starting the FM4800H
Move the machine to the field in the transport position. When the machine
is at the crop to be irrigated, disconnect the tractor from the front drawbar.
Connect the tractor to the rear drawbar. Insert the electric brake connector
in the female connector for the tractor lights. The machine then winds up in
the crop and stops.
Disengage the stop pawl at the hose drum.
The stop pawl at the hose reel is disengaged when laying the hose.
Remember!! When starting the machine on falling ground, you must be
VERY careful not to disconnect the tractor from the machine until the
machine has been put into gear, otherwise the machine may run away.
Safety stop
During irrigation
During transport
Secure the long ground spikes. Lower the drawbar over the hose , and
release the safety stop so the hose reel runs on the hose.
The machine should be unwound completely at least every 3rd time.
Before starting to unwind the machine, reset PROGRAM RAIN. To do this,
press the TOGGLE SWITCH located on the side of the electric box upwards
(reset).
When unwinding the machine, the TOGGLE SWITCH must be in the centre
(unwind) so it cannot reset on the way out. After unwinding, press the
TOGGLE SWITCH down (operation).
ALWAYS REMEMBER that the TOGGLE SWITCH must be pressed down
during operation, otherwise the machine will not move.
Unwind the machine at max. 5 km/h to keep the hose tight on the drum at
all times with the electric brake. If you do not lay the hose straight out be
very careful to ensure that the hose is always tightened on the hose drum.
Preparing the machine for irrigation
Disengage the stop pawl at the hose to enable operation.
Also remember to release the electric brake and disconnect the electric
brake connector from the tractor.
Ground spike