Page
6
of
9
Advanced Bridge Valve
™
Installation
Location
:
The
Advanced Bridge Valve
should be installed under the kitchen or
bathroom sink at the farthest fixture from the water heater. Branched
plumbing systems will need an
Advanced Bridge Valve
at the end of each
line. Additional
Advanced Bridge Valves
are available
Note
: Do not use Teflon tape or pipe dope on
Advanced Bridge
Valve
connections.
Components:
Step 1.
Turn off water to the house and drain the water from the pipes.
Step 2.
Turn off both the hot and cold angle stops (valves) below the sink.
Step 3.
Disconnect existing hot and cold water supply lines from the angle stops
and replace angle stops with custom angle stops (see below).
Step 4.
Attach new stainless steel advanced 1/2" x 1/2" supply lines to angle stops.
