Fastech EZI-STEP BT, Руководство по эксплуатации

Страница: 18 / 22

www.fastech-motions.com - 18
18. Setting Up Parameters
18.1 Setting Up Parameters
18.2 Resolution Selection
18.3 Stop Current Selection
18.4 Rotational Direction Selection
RS-232C serial communication port of a computer is used to set up various parameters of the motor drive. The
set-up program is supplied with the product on a companion CD. It is recommended to make a copy of the pro-
gram in any folder on your computer. Then please execute the program, named “Ezi-STEP BT Setting.exe”, from
the folder.
Resolution means the number of pulses per one rotation of a motor.
Select a desired resolution by pressing in
button on Ezi-STEP BT Setting screen.
The possible resolution values are 500~50,000.
Stop Current means the motor current value automatically set in 0.1 sec after motor stops. This is to prevent
the overheat ot a motor when the motor is under long time idling. Select a desired Stop Current by pressing in
button on Ezi-STEP BT Setting screen. The range of this value is 10~100 and the unit
is a percentage.
The direction of the motor rotation can be selected either in CW(Clockwose) or in CCW(Counter Clockwise). Select
a desired rotation direction by pressing in
button on Ezi-STEP BT Setting screen.
: Please select an appropriate Prot No. and press button. Then it will display the various
parameter values previously stored in the drive.
: Save the parameter values displayed on the screen into the drive.
Press button to save the value selected into the drive.
※ The default factory setting is 10,000[Pulses/Revolution].
Press button to save the value selected into the drive.
※ The default factory setting is 50%.
Press button to save the value selected into the drive.
※ The default factory setting is CW(Clockwise).
: Display the parameter values stored in the drive.
※ Error Message
There is no response. (You may select wrong baudrate of wrong port no.) :
① Select wrong Port No.
② Select already used Port No. in other program.
③ Communication cable is not connected.
④ Power is not supplied to drive.